Handmade tuning parts (pads, ergo clamps, pulleys, pulley cage, derailleur clamp)
Hmm I've to go and cut my hair in a jiffy. Will write about these in greater detail later ^^... all I have to say is, my hand hurts real bad. The pivot bolt on the rear derailleur is VERY difficult to tune! You need 1 hand to press the washer + pivot bolt + spring together, 1 hand to 'twist/tension' the spring with the washer, so that the 'catch' on the washer is forced into a groove, and 2 hands to pry apart the C-clip and clip onto the pivot bolt to keep everything in place? It's a lot of tension to exert with your hands >_<. I think I'll ask around for advice later... must be doing something wrongly. More pictures on rear derailleur etc. later.
No comments:
Post a Comment